Post
No Man's Sky: Beautiful Corvette Spaceship Build Tutorial (Includes Open Lounge)
This tutorial guides you step-by-step on how to create a Corvette-class spaceship with a beautiful silhouette and open lounge in No Man's Sky. You can use snap glitches to create complex structures and decorate the interior to design a unique spaceship.
1. 🛠️ Introduction to Corvette Spaceship Construction and Preparations
- ✅ This video explains how to build a Corvette spaceship with a sleek hull and open lounge.
- ✅ Since snap glitches are used, you must prepare scaffolding that is misaligned by 0.5 mass in each direction in advance.
- ⚠️ Be careful as excessive use of glitches can cause defects.
00:24 - 01:34
1. 🛠️ Introduction to Corvette Spaceship Construction and Preparations
- ✅ This video explains how to build a Corvette spaceship with a sleek hull and open lounge.
- ✅ Since snap glitches are used, you must prepare scaffolding that is misaligned by 0.5 mass in each direction in advance.
- ⚠️ Be careful as excessive use of glitches can cause defects.
01:35 - 04:11
2. Creating the Frame: Installing Landing Gear, Habitation, Passageway, Cockpit
- ✅ Install the landing gear 1 mass behind the center, and install the habitation, passageway, Titan-class cockpit, and Titan-class landing bay on top of it.
- ✅ Delete the habitation and install the Titan-class landing bay in the passageway to create an entrance connecting the open lounge and cockpit.
- ✅ Use scaffolding misaligned by 0.5 mass to place two habitations next to each other around the landing gear to secure open lounge space.
- ✅ Install two Ambassador-class passageways overlapping each other, and install one habitation connected to the middle passageway.
- ✅ Place super cruise cowlings in front of and behind the upper passageway, and place turbine airfoils using scaffolding misaligned by 0.5 mass to the side.
04:12 - 05:06
3. 🚀 Adding Hull Details: Placing Wing Modules and Airfoils
- ✅ Place the Arcadia wing module using scaffolding misaligned by 0.5 mass in the vertical direction.
- ✅ Copy the turbine airfoil and align it in the reverse direction to make the fuselage smoother.
- ✅ Install super cruise airfoils on both sides of the lower passageway and cockpit.
05:08 - 07:08
4. Main Wing Construction: Root and Wing Placement
- ✅ Install the root of the main wing using scaffolding misaligned by 0.5 mass in the front, rear, and vertical directions.
- ✅ Place the turbine airfoil to match the snap point of the scaffolding.
- ✅ Place the turbine airfoil using scaffolding misaligned by 0.5 mass in the vertical direction, and place it facing the rear as well.
- ✅ Place the Argo-Naut winglet under the wing, and cover the protruding part behind the main wing with the Argo-Naut airfoil.
07:09 - 08:58
5. 🔥 Engine and Additional Details: Twin Echo Jet, Reactor, S-Foil Installation
- ✅ Place the Twin Echo Jet using scaffolding offset back and forth.
- ✅ Place the Pyro Drive Booster using vertically offset scaffolding.
- ✅ Place the Zenith-class reactor using scaffolding offset vertically and back and forth.
- ✅ Place the passageway and place the Titan subflight thruster on both sides.
- ✅ Place the Medusa Reactor on top of the Titan subflight thruster in a half-inserted form.
- ✅ Copy and connect the passageway and snap the Arcadia S-foil into place.
08:59 - 10:22
6. Adding Lower Hull and Armament: Diffuser, Cowling, Weapon Mounting
- ✅ Place the habitation on the lower hull misaligned by 0.5 mass and place the Hard Frame Diffuser.
- ✅ Place the Long Shore Cowling on top of the habitation and snap it so that it overlaps the Titan subflight thruster and root.
- ✅ Copy the Long Shore Cowling, move it forward, and turn it upside down.
- ✅ Install the Photon Cannon under the passageway behind the cockpit, and place one Dead Eye Cannon on the bottom of each wing.
- ✅ Place the torpedo launcher in a position where the stand is hidden.
10:27 - 13:31
7. 🛋️ Decorating the Open Lounge: Window, Floor, Furniture Placement
- ✅ Copy the habitation at the bottom to fit the ground perfectly and use it as a guide when placing windows or floors.
- ✅ Install windows in free placement, and hide the gaps in the walls with flat panels or side panels.
- ✅ Finish the flooring neatly using light floors or flat panels.
- ✅ Change the color of the panels and decorate the open lounge by placing the desired furniture.
- ✅ Install internal stairs in the passageway to place facilities or furniture on the 2nd and 3rd floors.