Post
Alchemy Factory: Step-by-step guide to building a condensed quicklime powder factory
This video provides a step-by-step guide on how to build a condensed quicklime powder factory in Alchemy Factory, including the necessary materials, blueprint placement, and tips for automation. Two variations of the build are offered: a compact one and a more aesthetically pleasing one.
1. 🏭 Introduction to the construction of the quicklime powder factory
- ✅ The video focuses on the construction of the quicklime powder factory.
- ✅ Blueprints will be used to facilitate construction.
- ✅ Two variations will be shown: a compact one and an aesthetic one.
00:01 - 00:19
1. 🏭 Introduction to the construction of the quicklime powder factory
- ✅ The video focuses on the construction of the quicklime powder factory.
- ✅ Blueprints will be used to facilitate construction.
- ✅ Two variations will be shown: a compact one and an aesthetic one.
00:49 - 01:26
2. 🧱 Materials needed to build the factory
- ✅ The materials vary slightly between the two versions of the factory.
- ✅ The aesthetic version requires less wood.
| Material | Quantity (Approximate) |
|---|---|
| Planks | 1,500 |
| Large wooden gears | 36 |
| Iron Ingots | 550 |
| Stones | 436 |
| Rope | 130 |
| Nails | 52 |
⚠️ The amount of stones may vary if stone bricks or lab supports are used.
01:39 - 02:34
3. 🛠️ Initial placement of blueprints and access to Google Drive
- ✅ Three initial blueprints are placed: stackable crusher, stackable furnace crucible, and stackable table saw.
- ✅ The blueprints are available on Google Drive for free.
- ✅ A Word document is provided on Google Drive with a step-by-step guide on how to use the blueprints.
03:10 - 04:07
4. ⚙️ Building the base with stackable crushers
- ✅ A stack of six crushers can be built individually or using a blueprint of a stack of six.
- ✅ The crusher outputs should be facing the player.
- ⚠️ The stackable furnace crucible blueprint contains errors and will be updated.
04:08 - 05:25
5. 🧱 Alignment and placement of blocks for the structure
- ✅ Elevators and blocks are used to build the structure.
- ✅ Stones (or alternative materials such as wood or brick) are used to replace parts of the mills.
- ✅ The structure is built so that the crusher directly feeds the crucibles.
05:26 - 06:06
6. 🚧 Building the structure around the crucibles
- ✅ A stone structure is built around the crucibles.
- ✅ The front of the structure should be left open to access the mills.
- ✅ Conveyor belts are placed to connect the mills.
06:07 - 06:58
7. 🔗 Connecting conveyor belts and placing the stackable crucible
- ✅ Conveyor belts are placed to connect the mills.
- ✅ The stackable crucible is aligned so that the belts connect automatically.
07:01 - 07:46
8. 🔄 Repeating the process and placing lab supports
- ✅ The process of placing belts and building the structure is repeated.
- ✅ Lab supports are placed to cover the structure.
07:47 - 08:27
9. 🧱 Completion of the first layer and aesthetic considerations
- ✅ The first layer of the structure is completed.
- ✅ Side blocks can be removed to improve aesthetics.
08:28 - 09:20
10. 🔥 Connecting the crucible and placing mills
- ✅ The crucible is connected, making sure the arrows are oriented from left to right.
- ✅ The mills are placed (which will already be in the updated blueprint).
09:21 - 10:14
11. 📏 Building the support structure for the mills
- ✅ A support structure is built for the mills, which is one block wide.
10:15 - 10:29
12. 🧰 Placement of the stackable table saws
- ✅ The stackable table saws are placed with the arrows pointing outwards.
10:30 - 10:58
13. ⬆️ Placement of conveyor belt elevators
- ✅ Conveyor belt elevators are placed on the table saws.
10:59 - 11:27
14. 🧱 Completion of the base of the structure
- ✅ The base of the structure is completed with stone around the furnaces.
11:46 - 12:34
15. ⬆️ Placement of conveyor belts and elevators
- ✅ Conveyor belts are placed on the sides of the structure.
- ✅ Elevators are placed to carry the materials to the top.
12:35 - 13:44
16. 🧱 Completion of the upper structure
- ✅ The upper structure is completed with bricks and lab supports.
- ✅ It is ensured that the structure has the same width throughout its extension.
13:45 - 14:36
17. ⬆️ Placement of central conveyor belts
- ✅ Conveyor belts are placed in the central part of the structure.
- ✅ Lab supports are used to facilitate placement.
14:37 - 15:21
18. 🧱 Completion of the structure and preparation for connection
- ✅ The structure is finished with bricks.
15:22 - 16:06
19. 🔗 Final connection of the table saws
- ✅ The table saws are connected, making sure the arrows are oriented correctly.
- ✅ Aesthetic adjustments can be made to the height of the table saws.
16:07 - 16:38
20. 🔄 Combination of conveyor belts and material output
- ✅ All conveyor belts are combined into one.
- ✅ An output is placed for the materials.
16:39 - 17:45
21. ✅ Functional factory and uses of quicklime powder
- ✅ The factory is now functional and produces quicklime powder.
- ✅ Quicklime powder is used in the manufacture of fertilizers and other higher-level products.
- ✅ To save the blueprint, the entire structure must be selected and saved in the blueprints.
17:46 - 18:27
22. 👋 Farewell and request for feedback
- ✅ Feedback is requested on the tutorial and suggestions for future videos.