Post
Flolab Surtect iPhone 17 Case Review: Classic Style Protection
The Flolab Surtect case stands out for its triple-layer design (TPU, TPE, and PC) that prioritizes iPhone protection. It offers customization with interchangeable buttons and camera rings, and presents superior performance in drop tests, especially in the corners, thanks to its TPE edge. Although the grip could be improved, its rigidity and secure fit, along with good protection for the camera and access to the screen, make it a recommended option.
1. 🛡️ Introduction to Flolab Surtect: A triple-layer design focused on protection
- ✅ The Flolab Surtect stands out for prioritizing protection, reminiscent of cases from before.
- ✅ It is a triple-layer case, combining polycarbonate (PC), thermoplastic polyurethane (TPU), and thermoplastic elastomer (TPE).
00:00 - 00:38
1. 🛡️ Introduction to Flolab Surtect: A triple-layer design focused on protection
- ✅ The Flolab Surtect stands out for prioritizing protection, reminiscent of cases from before.
- ✅ It is a triple-layer case, combining polycarbonate (PC), thermoplastic polyurethane (TPU), and thermoplastic elastomer (TPE).
00:39 - 01:25
2. 🎨 Customization and design features: Color, grip, and weight
- ✅ Offers customization options, such as replacing the camera ring and buttons.
- ✅ Available in black and white, with frosted or transparent back options. The white model can get stained by the color of pants.
- ✅ Includes small feet on the bottom to prevent scratches on the back.
- ✅ Adds 46 grams of weight to the iPhone, which is considered average.
01:26 - 02:23
3. 🖐️ Handling and usability: Texture, buttons, and port access
- ⚠️ The grip is regular due to the smooth texture, which could cause it to slip out of your hand occasionally.
- ✅ The buttons are soft to the touch, offering a good contrast with the edge of the case.
- ✅ Access to the screen is decent thanks to the edges with a gradual slope.
- ✅ The port hole is large enough for most cables.
02:24 - 03:02
4. 💪 Protection design: Thickness, rigidity, and fit
- ✅ The corners have a thickness of 2.3 mm, while the back is 1.9 mm.
- ✅ Stands out for the large amount of TPE along the edge, maximizing protection.
- ✅ Requires 37 Newtons to bend 8 mm, being 19% more rigid than average.
- ✅ 35 Newtons are needed to remove the corners, indicating a secure fit to the iPhone.
03:03 - 03:40
5. 💥 Drop tests: Superior performance in corner impacts
- ✅ In corner drop tests, the iPhone registered 7 G, 32% below average.
- ✅ The rotation rate after the drop is 18% better than average.
- ✅ The settling speed is 78% faster.
- ✅ The total force is 15% lower than average.
- ✅ The TPE along the edge cushions the impact, reducing the force transmitted to the iPhone.
03:41 - 04:40
6. 🤕 Front and camera drop tests: Results and analysis
- ✅ In frontal drops, the initial impact was 17% better than average, with a total force 17% below average.
- ✅ In drops on the camera, the initial impact was 49% better, although the settling speed was 30% slower, but the total force was 21% better.
- ✅ The two-piece design of the camera protection absorbs the initial impact well.
04:41 - 05:28
7. 👍 Conclusion: Is the Flolab Surtect worth it?
- ✅ The case is competitively priced and offers phenomenal protection thanks to its triple-layer design.
- ⚠️ The only drawback is the grip, but it can be solved with an additional accessory.
- ✅ Overall, the Flolab Surtect is a recommended option for its protection and well-thought-out design.