Post
MineMogul: Optimization with Micro-Forging for Minimum Item Count
In this video, the author explores the 'Micro Forging' technique in MineMogul to minimize object count and reduce lag. He builds small processing stations near the mines, transforming resources into packaged products as quickly as possible. The video details the setup, challenges, and advantages of this method, offering tips on using conveyors, packagers, and managing object flow.
1. 🚀 Introduction to Micro Forging and Preparation for the New Update
- ✅ The video shows a micro forging build in MineMogul, created in a new game.
- ✅ The goal is to demonstrate a strategy to keep the object count low in the game.
- ⚠️ A new update (1.37) is anticipated with a new map and items.
00:01 - 00:28
1. 🚀 Introduction to Micro Forging and Preparation for the New Update
- ✅ The video shows a micro forging build in MineMogul, created in a new game.
- ✅ The goal is to demonstrate a strategy to keep the object count low in the game.
- ⚠️ A new update (1.37) is anticipated with a new map and items.
00:29 - 01:25
2. ⛏️ Miner Setup and Initial Collection System
- ✅ 53 miners are used, most equipped with turbo drills and hardened picks.
- ✅ One miner is configured to collect emeralds.
- ✅ Each miner is connected to a small system, usually two or three nodes.
01:26 - 01:59
3. ⚙️ Copper Processing: Separation, Smelting, and Packaging
- ✅ The system separates copper from coal.
- ✅ The copper is smelted into plates and ingots, then polished.
- ✅ The polished objects are sent to the packager.
- ✅ A loop with robotic arms is used to ensure the plates fall correctly into the packager.
02:00 - 03:21
4. 📦 Packaging and Transport: Challenges and Solutions
- ✅ Packaging works best with a low volume of objects.
- ✅ Roller conveyors are used, although the boxes tend to move erratically.
- ✅ Multiple conveyor lines are used to improve reliability.
- ✅ Problems arise when boxes overlap.
03:22 - 04:37
5. 🚧 Optimizing Transport with Rollers and Conveyor Belts
- ✅ The use of curved pieces in roller conveyors is avoided due to instability.
- ✅ Multiple lanes are used to mitigate boxes falling.
- ✅ The area produces polished iron ingots and iron plates.
- ✅ Crushed coal is used to fuel the process.
04:38 - 05:34
6. 📦 Packagers and Conveyor Design for Efficient Flow
- ✅ The importance of using a straight piece after the packagers to prevent boxes from getting stuck is emphasized.
- ✅ It is recommended to use ramps or ledges that lead to the conveyor pieces.
- ✅ Multiple conveyors are used to avoid problems caused by boxes falling.
05:35 - 06:22
7. 📊 Performance and Object Count with Micro Forging
- ✅ It is confirmed that all 53 miners are in operation.
- ✅ The object count remains at 764, significantly lower than in previous builds.
- ✅ Micro forging reduces lag by minimizing the number of objects in the world.
06:23 - 07:28
8. ⚖️ Production Balance and Creative Solutions
- ✅ A balance is sought in the production of different items, prioritizing the manufacture of pipes.
- ✅ A copper processing system is shown that uses a robotic arm to transfer plates to a pipe roller.
- ✅ Coal is converted into gems for use in production.
07:29 - 08:57
9. 🚚 Box Transport and Distribution Challenges
- ✅ The challenges of box transport are discussed, including the randomness in the way they fall.
- ✅ Conveyor belts are used instead of ducts to prevent boxes from getting stuck.
- ✅ The importance of micro forging is highlighted to reduce the likelihood of problems due to the difficulty in detecting jams.
08:58 - 09:30
10. 💎 Emerald Production and Elevated Conveyor Design
- ✅ Low emerald production is mentioned due to the configuration of a single miner.
- ✅ An elevated production area is shown that uses conveyor belts to raise the boxes.
- ✅ It is observed that the boxes move well on belts without walls, although at a lower speed.
09:31 - 10:24
11. 🎢 Box Behavior on Roller Conveyors and Collision Problems
- ✅ The erratic behavior of boxes on roller conveyors is described.
- ✅ A curve is maintained in the conveyor without loss of boxes, although possible problems with higher volume are warned about.
- ✅ It is recommended to keep the conveyors straight and use edge jumps.
10:25 - 11:32
12. 🛠️ Anticipating Game Changes and Polishing System Optimization
- ✅ Changes in the game are anticipated, including larger furnaces and new production requirements.
- ✅ An area where iron and gold are crushed and sorted is shown.
- ✅ A vibrating table is used to polish the coal, with a recirculation system for unpolished pieces.
11:33 - 12:32
13. 🛤️ Roller Conveyor Design and Solving Stuck Box Problems
- ✅ The complexity of designing straight roller conveyor lines is described.
- ✅ An example of a box that has fallen off the conveyor is shown.
- ✅ It is suggested to place an additional roller to help the boxes straighten up.
- ✅ The difficulty of removing stuck boxes due to the lack of a command to eliminate them is highlighted.
12:33 - 13:10
14. 🔥 Micro Forges and Resource Management
- ✅ It is explained that most micro forges do not need more than one furnace.
- ✅ The main objective is to melt and package the resources as soon as possible to reduce the number of objects in the world.
- ✅ An area that processes copper is shown, using multiple furnaces due to the abundance of copper nodes.
13:11 - 14:29
15. 🤖 Resource Distribution and Use of Robotic Arms
- ✅ Robotic arms and smart dividers are used to distribute resources between the furnaces.
- ✅ Copper plates and roller pipes are produced.
- ✅ A long conveyor is shown to carry the resources to a packager.
14:30 - 15:32
16. 💎 Micro Forge Summary and Packaging Bonuses
- ✅ The construction of the micro forge is summarized.
- ✅ It is highlighted that the object count remains low.
- ✅ It is explained that the boxes can contain different amounts of objects.
- ✅ A 5% cash bonus for packaging the objects is mentioned.
- ✅ It is observed that some objects, such as gold pipes, are not as profitable as others.
15:33 - 16:35
17. ✨ Teleportation and Problems with Boxes on Conveyors
- ✅ It is recommended to use the teleport function to return to the main area.
- ✅ It is observed that the boxes can become disordered after teleporting.
- ✅ It is suggested that the use of regular conveyor belts could reduce problems.
- ✅ It is reiterated that collisions between boxes are the main cause of problems.
16:36 - 17:30
18. 🛠️ Anticipating the New Update and Farewell
- ✅ Enthusiasm is expressed for the new game update.
- ✅ A box that has fallen off the conveyor due to a specific problem is shown.
- ✅ The problem is corrected by placing an additional roller.
- ✅ The video concludes, thanking the viewers.